Colin's SECA Kits

[Firebug1]

I know nothing about building electronics but still Collins designs gives me an itch...

[Dr Bunsen Honeydew]

Those heatsinks will give you a few scratches as well

[Firebug1]

Those heatsinks will give you a few scratches as well

Probably, they look scary...

[Colin Wonfor]

You just need some of these to complete the heating appliance looks

Yes please

[Colin Wonfor]

Very Odd I replied to this yesterday before the new kitchen and minor flooding came.

Right the PCB that James uses biased up and a increase in voltage will give 50W it is in fact the original PCB which I thought I had lost the artwork for, the problem will be in the 40W version the heat sink will rise between 15 - 20C above ambient and with lovely kids about like James darling, I did not want them to get damaged,
But by increasing the bias and voltage you will get on testing 52W and a heat sink temperature increase above ambient depending on standing and clearance between 18-25C.

So the PCB we have are the same as James but will do the job so go get them lads.

But do have fun and any problem do contact me here.

[Colin Wonfor]

From Alan


Admin Edit - Removed to be redone by Colin.

[Dr Bunsen Honeydew]

Who is Allen?

If you are talking about Biscuit Head / Allan Brown then that man has caused me enough problems. Especially as being the owner and liar and crook about that prototype TSS we have just had a saga with. If that is his post I will remove it, I do not want that man here in any form or the Chews forum.

You can put your own description up.

[Colin Wonfor]

Who is Allen?

If you are talking about Biscuit Head / Allan Brown then that man has caused me enough problems. Especially as being the owner and liar and crook about that prototype TSS we have just had a saga with. If that is his post I will remove it, I do not want that man here in any form or the Chews forum.

You can put your own description up.

No Alan Elsdon not Alan Brown from my past whilst Magnum was started I also had a tiny tiny company making PA stuff Called Elsdon Wonfor Ltd now Elsdon Wonfor Audio Ltd even thou I am not a director, The original company did the Dreadnought amps. So nothing to do with biscuits sorry , Alan E. was and is a a Computer Programmer he and I worked for ICL a British company making computers.

Toys like this:-

[Dr Bunsen Honeydew]

OK sorry, put it up again, but please I would much refer you kept us away from any contact with Chews.

[Colin Wonfor]

OK sorry, put it up again, but please I would mush refer you kept us away from any contact with Chews.

No problem it will be done.