Tinker, Tailor, Streamer, Pi.

All general audio posts go here.
User avatar
Fretless
Posts: 9290
Joined: Wed Nov 12, 2014 12:15 pm
Location: Somewhere in Holland
Has thanked: 1487 times
Been thanked: 2280 times
Netherlands

Re: Tinker, Tailor, Streamer, Pi.

Unread post by Fretless »

If this current exercise is teaching me anything it is that digital (and especially streaming) audio is very much dependent upon 2 factors:
1) Power supplies to components
2) Data-stream synchronisation

Although components, mainly processing chips, are not expensive - they do need plenty of clean power to run optimally. So the idea of a cheapy Chifi DAC with a huge Linear PSU is actually not so strange. Or a pocket-money Raspberry Pi credit-card-sized computer running your streaming system and kicking out megabuck SQ.

But the integrity of the generated data-stream is where the pitfalls are to be found. Jitter is the sound-killer. During transit from the internet, CD, Hard-disk, NAS - the signal can be scrambled slightly by cables, plugs, devices along the way, RF interference, you name it. This causes the bits and bytes to lose, ever-so-slightly, their coordination with each other and the timing/synchronisation of the signal.

So when, finally, the data gets converted into sound-waves there is a sense of 'blurring' as the music isn't quite being reproduced with the precision that was originally intended. Those running revealing digital audio setups will have experienced this feeling of 'a curtain being removed' or 'increased sharpness and detail' as components/cables are implemented that reduce jitter effects.

So in this light, yesterday I saw something that is interesting me enormously. the 'Silent Angel Bonn N8'

BONN N8 PRODUCT INTRODUCTION

Image

Looks like a Network Switch? It is a network switch.
But then one with a precision reclocking circuit and ultra-low noise power systems. Designed to get your precious audio (and/or video) data to wherever it needs to go with the utmost care and lack of degradation.

Yes there are already other audiophile Network switches on the market costing seriously big money, this unit is coming at the relatively affordable price of 395 euro. I'm thinking very hard about getting one.

To be continued ... :ugeek:

Upstairs:
Vinyl
Pro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: P50sa - Cube2 - SSP - LS6+ Sabaj A10a (x2)
Downstairs:
Vinyl
Logic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 - BMU+ Aiyima A07 MAX (x2) + Arcam One
HP: HifiBerry Digi+ PRO + Sabaj A10d
Office:
Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith THX AAA 887
Headphones: German Maestro, Monolith & AQ

User avatar
CN211276
Posts: 6522
Joined: Tue Aug 09, 2016 9:29 am
Location: Cardiff
Has thanked: 1401 times
Been thanked: 976 times
EUROPEAN_UNION

Re: Tinker, Tailor, Streamer, Pi.

Unread post by CN211276 »

Fretless wrote: Thu Jan 09, 2020 10:14 am Those running revealing digital audio setups will have experienced this feeling of 'a curtain being removed' or 'increased sharpness and detail' as components/cables are implemented that reduce jitter effects.

This is very true and what is happening cannot be measured and has objecivists scoffing.
Main System
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Farnells cat 8 ethernet cable

Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ

Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat

RIP Doc

User avatar
slinger
Posts: 9233
Joined: Wed Aug 22, 2012 4:30 pm
Location: The Garden of England
Has thanked: 4567 times
Been thanked: 3118 times
EUROPEAN_UNION

Re: Tinker, Tailor, Streamer, Pi.

Unread post by slinger »

My first move would be (in fact "will" be is closer, I'm just not sure when yet) to upgrade your ethernet cabling. Needless to say, given my current proclivities, it will probably end up being some flavour or other of AudioQuest, although I've been pointed at MeiCord Opal as a good audiophile option. I've also recently read reports that suggest that uprating to Cat8 (I'm currently using Cat7) can be a worthwhile change, which might be a less expensive first step for me to try.

Funnily enough, I also replaced my hub yesterday, but not with anything as exotic as the above, just a bog-standard TP-Link LS108G 8-Port Gigabit Hub.
Amps - NVA P50, AP30, A40, Stanislav Palo Tube Headphone Amp BB 85
Speakers - Monitor Audio Silver RX2
Cables - NVA LS1+LS3, SSC, Gotham S/PDIF, IBRA Optical
Digital - NAD C516BEE, SONY ST-SDB900 DAB TUNER, TEAC UD-H01 DAC
Analogue - Pro-Ject Debut Carbon Esprit SB, Graham Slee Gram Amp 2 Phono
Cans - Grado SR80, ATH-M50X

User avatar
Fretless
Posts: 9290
Joined: Wed Nov 12, 2014 12:15 pm
Location: Somewhere in Holland
Has thanked: 1487 times
Been thanked: 2280 times
Netherlands

Re: Tinker, Tailor, Streamer, Pi.

Unread post by Fretless »

Currently have a Netgear switch running my NAS and 3 streaming installations. It works fine and I have no complaints about it.
But you don't know until you try ....

Image

Might be able to loan a Silent Angel unit for a demo next week. :dance:

Upstairs:
Vinyl
Pro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: P50sa - Cube2 - SSP - LS6+ Sabaj A10a (x2)
Downstairs:
Vinyl
Logic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 - BMU+ Aiyima A07 MAX (x2) + Arcam One
HP: HifiBerry Digi+ PRO + Sabaj A10d
Office:
Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith THX AAA 887
Headphones: German Maestro, Monolith & AQ

User avatar
slinger
Posts: 9233
Joined: Wed Aug 22, 2012 4:30 pm
Location: The Garden of England
Has thanked: 4567 times
Been thanked: 3118 times
EUROPEAN_UNION

Re: Tinker, Tailor, Streamer, Pi.

Unread post by slinger »

This is around 5 years old, but interesting... https://www.asa.org.uk/rulings/the-chord-company-ltd-a14-274211.html#.VN2WRPldV8H Perhaps I'll hold off on upgrading to Cat8 pending further investigation. :doh:
Amps - NVA P50, AP30, A40, Stanislav Palo Tube Headphone Amp BB 85
Speakers - Monitor Audio Silver RX2
Cables - NVA LS1+LS3, SSC, Gotham S/PDIF, IBRA Optical
Digital - NAD C516BEE, SONY ST-SDB900 DAB TUNER, TEAC UD-H01 DAC
Analogue - Pro-Ject Debut Carbon Esprit SB, Graham Slee Gram Amp 2 Phono
Cans - Grado SR80, ATH-M50X

User avatar
CN211276
Posts: 6522
Joined: Tue Aug 09, 2016 9:29 am
Location: Cardiff
Has thanked: 1401 times
Been thanked: 976 times
EUROPEAN_UNION

Re: Tinker, Tailor, Streamer, Pi.

Unread post by CN211276 »

Have not given much thought to ethernet cables and routers. The ethernet cable I use for audio is of decent quality but the four way router, supplied by Sky, might have limitations.
Main System
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Farnells cat 8 ethernet cable

Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ

Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat

RIP Doc

User avatar
Toontrev
Posts: 166
Joined: Mon Aug 22, 2016 12:48 pm
Location: Chester le Street
Has thanked: 31 times
Been thanked: 43 times

Re: Tinker, Tailor, Streamer, Pi.

Unread post by Toontrev »

Apologies if I'm totally misunderstanding the comments regarding cabling but unless you live in a relatively new property, isn't the broadband signal using very old telephone standard cabling before it reaches the router ? My Pi is hardwired into the router.

User avatar
slinger
Posts: 9233
Joined: Wed Aug 22, 2012 4:30 pm
Location: The Garden of England
Has thanked: 4567 times
Been thanked: 3118 times
EUROPEAN_UNION

Re: Tinker, Tailor, Streamer, Pi.

Unread post by slinger »

I should probably have mentioned, I'm using a linear psu to power my router/hub, which seems to make a positive difference. YMMV, as they say.
Amps - NVA P50, AP30, A40, Stanislav Palo Tube Headphone Amp BB 85
Speakers - Monitor Audio Silver RX2
Cables - NVA LS1+LS3, SSC, Gotham S/PDIF, IBRA Optical
Digital - NAD C516BEE, SONY ST-SDB900 DAB TUNER, TEAC UD-H01 DAC
Analogue - Pro-Ject Debut Carbon Esprit SB, Graham Slee Gram Amp 2 Phono
Cans - Grado SR80, ATH-M50X

User avatar
Fretless
Posts: 9290
Joined: Wed Nov 12, 2014 12:15 pm
Location: Somewhere in Holland
Has thanked: 1487 times
Been thanked: 2280 times
Netherlands

Re: Tinker, Tailor, Streamer, Pi.

Unread post by Fretless »

Ethernet cables.

Well I cannot say that I have paid much attention to them up to now - so I have had a look at the audio system links and, to my horror, most of them are CAT 5 or 5e. The only CAT 6 leads are the one feeding the Netgear switch from the router and one CAT 6 cable that runs to the Tinkerboard in the main system.

Looks like if I upgrade the switch then I will certainly have to put a higher-grade LAN cable in between that and the NAS.

Problems, problems. :violin:

Upstairs:
Vinyl
Pro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: P50sa - Cube2 - SSP - LS6+ Sabaj A10a (x2)
Downstairs:
Vinyl
Logic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 - BMU+ Aiyima A07 MAX (x2) + Arcam One
HP: HifiBerry Digi+ PRO + Sabaj A10d
Office:
Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith THX AAA 887
Headphones: German Maestro, Monolith & AQ

User avatar
CN211276
Posts: 6522
Joined: Tue Aug 09, 2016 9:29 am
Location: Cardiff
Has thanked: 1401 times
Been thanked: 976 times
EUROPEAN_UNION

Re: Tinker, Tailor, Streamer, Pi.

Unread post by CN211276 »

I am confused by the Cat specification. Are higher quality routers required to accomodate higher Cat numbers?
Main System
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Farnells cat 8 ethernet cable

Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ

Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat

RIP Doc

Post Reply