Oehlbach
- slinger
- Posts: 9276
- Joined: Wed Aug 22, 2012 4:30 pm
- Location: The Garden of England
- Has thanked: 4638 times
- Been thanked: 3153 times
Oehlbach
As a lot of us know the quality of the Oehlbach XXL MasterClock I just thought I'd mention that their website is worth keeping an eye on for bargains. The XXL MasterClock is back on offer at €74.00, and their Jitterbug-type-thingy, the "Pure Clock" is down to €29.23, and for €120.00 the "XXL Phono PreAmp Ultra" might be worth a look if you've got a MM second system, or similar. Obviously I haven't tried them (apart from the XXL Master Clock) but Oehlbach certainly has a good rep so experimenting might be worthwhile. https://www.oehlbach.com/en/
Amps - NVA P50, AP30, A40, Stanislav Palo Tube Headphone Amp BB 85
Speakers - Monitor Audio Silver RX2
Cables - NVA LS1+LS3, SSC, Gotham S/PDIF, IBRA Optical
Digital - NAD C516BEE, SONY ST-SDB900 DAB TUNER, TEAC UD-H01 DAC
Analogue - Pro-Ject Debut Carbon Esprit SB, Graham Slee Gram Amp 2 Phono
Cans - Grado SR80, ATH-M50X
Speakers - Monitor Audio Silver RX2
Cables - NVA LS1+LS3, SSC, Gotham S/PDIF, IBRA Optical
Digital - NAD C516BEE, SONY ST-SDB900 DAB TUNER, TEAC UD-H01 DAC
Analogue - Pro-Ject Debut Carbon Esprit SB, Graham Slee Gram Amp 2 Phono
Cans - Grado SR80, ATH-M50X
- Fretless
- Posts: 9327
- Joined: Wed Nov 12, 2014 12:15 pm
- Location: Somewhere in Holland
- Has thanked: 1514 times
- Been thanked: 2308 times
Re: Oehlbach
That cheap USB cable of theirs is also a steal at 7 euros.
https://www.oehlbach.com/en/audio-equip ... er=D1C9342
https://www.oehlbach.com/en/audio-equip ... er=D1C9342
Upstairs:
VinylPro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: Cube2 - SSP - LS6+ Sabaj A10a {x2)
Little Bear MC2 + AQ NightHawk
Downstairs:
VinylLogic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 & PSU - BMUAiyima A07 MAX + Arcam One
HP: Allo DigiOne + Sabaj A10d + AQ NightOwl
Office: Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith 887 + German Maestro GMP 450
-
- Posts: 4
- Joined: Tue Sep 15, 2020 9:38 pm
- Location: Kingston upon Thames
- Has thanked: 3 times
- Been thanked: 6 times
Re: Oehlbach
Purchased the Oehlbach XXL Masterclock after reading good reviews on this forum. Glad I did as its stop me purchasing a New Dac.
I have found improvements in low level detail and a better grip of the music from my Flac files so very happy with results . In terms of USB cabling is it recommended to have a "better" usb cable on the input from pc to XXL clock or on the output from the XXL. I have noticed differences in presentation with input usb cable but not experimented with the output apart from trying a usb splitter to two Dacs with bad results !! So any experience with members ??
Also now I have noticed an improvement in music performance with the XXl is it worth getting a 7v Linear power supply to replace the switch mode unit supplied with the unit.
I am using Teac UD 503 and NT 503 Dacs. Any recommendations to a new poster appreciated. Thanks
I have found improvements in low level detail and a better grip of the music from my Flac files so very happy with results . In terms of USB cabling is it recommended to have a "better" usb cable on the input from pc to XXL clock or on the output from the XXL. I have noticed differences in presentation with input usb cable but not experimented with the output apart from trying a usb splitter to two Dacs with bad results !! So any experience with members ??
Also now I have noticed an improvement in music performance with the XXl is it worth getting a 7v Linear power supply to replace the switch mode unit supplied with the unit.
I am using Teac UD 503 and NT 503 Dacs. Any recommendations to a new poster appreciated. Thanks
- karatestu
- Posts: 5967
- Joined: Sun Jan 08, 2017 4:40 pm
- Location: North Yorkshire
- Has thanked: 1877 times
- Been thanked: 1402 times
Re: Oehlbach
Welcome to the forum Glad you have heard improvements. I have no experience of this product but good linear psu's usually make a worthwhile improvement over generic switched supplies.
Somebody here will surely be able to point you in the direction of something suitable. As an aside, I noticed a big jump in sq when I replaced the master clock in my cdp and gave it it's own little psu.
Somebody here will surely be able to point you in the direction of something suitable. As an aside, I noticed a big jump in sq when I replaced the master clock in my cdp and gave it it's own little psu.
DIY FREE ZONE
- Fretless
- Posts: 9327
- Joined: Wed Nov 12, 2014 12:15 pm
- Location: Somewhere in Holland
- Has thanked: 1514 times
- Been thanked: 2308 times
Re: Oehlbach
Hi Ruffra51 and welcome to HFS.
I am a big fan of the XXL Masterclock but haven't yet thought about changing the power supply for a linear one. Good idea for a future upgrade possibility.
As for USB cables - they make a noticeable difference in SQ and are worth investigating. I did a USB cable shoot-out here on the forum not long ago, checking several different links from the Masterclock to DAC.
The link from the PC to Masterclock is also important. The Oehlbach regenerates and resynchronises the data stream it receives. But if that has already been distorted by jitter then you get a 'rubbish in, rubbish out' situation.
Ideally you need a 'good' cable from PC to reclocker and a 'better' link from there to the DAC.
There are several excellent USB audio cables available like: AudioQuest Carbon, Wireworld Starlight 7 or DH Labs Silver Sonic.
Recent thoughts on this exact subject have prompted me to order a second DH Labs Mirage USB link for my installation to run from PC to Masterclock (sublime -sounding cable currently at 40% discount from a webshop in Canada). I will certainly be reporting on that when it arrives.
Another tweak is the use of an AudioQuest Jitterbug (or 2) in the output from the PC. This is a USB-plug that filters electronic noise out of the connection and stabilises the USB output section of the host device.
Loads of things to play around with here.
Have fun!
I am a big fan of the XXL Masterclock but haven't yet thought about changing the power supply for a linear one. Good idea for a future upgrade possibility.
As for USB cables - they make a noticeable difference in SQ and are worth investigating. I did a USB cable shoot-out here on the forum not long ago, checking several different links from the Masterclock to DAC.
The link from the PC to Masterclock is also important. The Oehlbach regenerates and resynchronises the data stream it receives. But if that has already been distorted by jitter then you get a 'rubbish in, rubbish out' situation.
Ideally you need a 'good' cable from PC to reclocker and a 'better' link from there to the DAC.
There are several excellent USB audio cables available like: AudioQuest Carbon, Wireworld Starlight 7 or DH Labs Silver Sonic.
Recent thoughts on this exact subject have prompted me to order a second DH Labs Mirage USB link for my installation to run from PC to Masterclock (sublime -sounding cable currently at 40% discount from a webshop in Canada). I will certainly be reporting on that when it arrives.
Another tweak is the use of an AudioQuest Jitterbug (or 2) in the output from the PC. This is a USB-plug that filters electronic noise out of the connection and stabilises the USB output section of the host device.
Loads of things to play around with here.
Have fun!
Upstairs:
VinylPro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: Cube2 - SSP - LS6+ Sabaj A10a {x2)
Little Bear MC2 + AQ NightHawk
Downstairs:
VinylLogic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 & PSU - BMUAiyima A07 MAX + Arcam One
HP: Allo DigiOne + Sabaj A10d + AQ NightOwl
Office: Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith 887 + German Maestro GMP 450
- CN211276
- Posts: 6552
- Joined: Tue Aug 09, 2016 9:29 am
- Location: Cardiff
- Has thanked: 1424 times
- Been thanked: 988 times
Re: Oehlbach
From my experiences of using the same make and spec of cable for the whole length of the chain you won't be disapointed.Fretless wrote: ↑Wed Sep 16, 2020 7:42 am
Recent thoughts on this exact subject have prompted me to order a second DH Labs Mirage USB link for my installation to run from PC to Masterclock (sublime -sounding cable currently at 40% discount from a webshop in Canada). I will certainly be reporting on that when it arrives.
Main System
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Lindy cat 6 US ethernet cable
Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ
Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat
RIP Doc
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Lindy cat 6 US ethernet cable
Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ
Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat
RIP Doc
-
- Posts: 4
- Joined: Tue Sep 15, 2020 9:38 pm
- Location: Kingston upon Thames
- Has thanked: 3 times
- Been thanked: 6 times
Re: Oehlbach
Many Thanks for the feedback on the two questions posed. I am thinking of upgrading the cable between the Teac Ud 503 to Masterclock . Currently using a hand built one made with silver wires from some Ebay seller based in Poland about 5 years ago. It always sounded a bit fuller and smoother than the regular Chord and Furutech ADL ones. However as suggested I will probably go for another Neotech Pure Silver NEUB-1020 when funds permit . I am feeding the Clock with a NEUB 1020 at the moment.
For the Teac Nt503 I need a 5m Length so cannot afford to go exotic on that. I am using a Chinese Ebay sellers cable which is described as using Silver-Plated α (Alpha) OCC Conductors ?? I was Surprised how better the sound was when I replaced a reasonable USB Cable with it last year and for £45 delivered not a bad deal. Sometimes you get lucky with this type of purchase.
I will look into a Linear Power Supply will a 7v 25w one be enough do people think ?? Will also look at a Jitterbug as well.
Many Thanks Again
For the Teac Nt503 I need a 5m Length so cannot afford to go exotic on that. I am using a Chinese Ebay sellers cable which is described as using Silver-Plated α (Alpha) OCC Conductors ?? I was Surprised how better the sound was when I replaced a reasonable USB Cable with it last year and for £45 delivered not a bad deal. Sometimes you get lucky with this type of purchase.
I will look into a Linear Power Supply will a 7v 25w one be enough do people think ?? Will also look at a Jitterbug as well.
Many Thanks Again
- karatestu
- Posts: 5967
- Joined: Sun Jan 08, 2017 4:40 pm
- Location: North Yorkshire
- Has thanked: 1877 times
- Been thanked: 1402 times
Re: Oehlbach
It should tell you on the switch mode psu (you may need a magnifying glass to read it) that came with it how many amps you need . I wouldn't go lower than the supplied unit.
DIY FREE ZONE