https://www.hometheatershack.com/forums ... hotos.html
Some nice piccies here.
Infinite baffle idea
- Lindsayt
- Posts: 4232
- Joined: Fri Jul 13, 2012 9:06 pm
- Has thanked: 1111 times
- Been thanked: 701 times
- karatestu
- Posts: 5978
- Joined: Sun Jan 08, 2017 4:40 pm
- Location: North Yorkshire
- Has thanked: 1880 times
- Been thanked: 1415 times
Re: Infinite baffle idea
I know it's nothing new and i was thinking about trying to minimise the amount of speaker in the room. Bass and mid bass drivers in the floor, tweeters mounted in the wall = no speaker cabs in the roomLindsayt wrote: ↑Wed Oct 16, 2019 7:24 pm People have done this with cinema systems. 24" drivers with the rears facing into an attic or under-floor space.
It works well. And all you need to undo it is a few floorboard sections.
You can even have the drivers forward facing with a box around them that vents the rear sound though a large hole in the floor.
With 8ft to the ceiling i hope they would work ok with being up firing.
Other thing to be careful with is using drivers with too low Qts. The drivers could hit their end stops and disintegrate. Low frequency output is said to be improved and there should be a lack of boxyness (new word) like open baffle.
DIY FREE ZONE
- karatestu
- Posts: 5978
- Joined: Sun Jan 08, 2017 4:40 pm
- Location: North Yorkshire
- Has thanked: 1880 times
- Been thanked: 1415 times
Re: Infinite baffle idea
Yes, seriously. Ever heard of people mounting drivers in an unused chimney breast and using the chimney as the enclosure
DIY FREE ZONE
- karatestu
- Posts: 5978
- Joined: Sun Jan 08, 2017 4:40 pm
- Location: North Yorkshire
- Has thanked: 1880 times
- Been thanked: 1415 times
- howardc1951
- Posts: 401
- Joined: Thu Jul 12, 2012 10:26 am
- Has thanked: 18 times
- Been thanked: 268 times
Re: Infinite baffle idea
I remember someone mounting a 2 way system of a Decca ribbon tweeter and Kef eliptical bass unit on a front panel and then over a hole into the cavity space of his living room wall.
- karatestu
- Posts: 5978
- Joined: Sun Jan 08, 2017 4:40 pm
- Location: North Yorkshire
- Has thanked: 1880 times
- Been thanked: 1415 times
Re: Infinite baffle idea
That's the kind of out of the box thinking we needhowardc1951 wrote: ↑Thu Oct 17, 2019 12:08 am I remember someone mounting a 2 way system of a Decca ribbon tweeter and Kef eliptical bass unit on a front panel and then over a hole into the cavity space of his living room wall.
DIY FREE ZONE
-
- Posts: 580
- Joined: Mon Feb 27, 2017 1:47 pm
- Location: East Staffordshire
- Has thanked: 0
- Been thanked: 1 time
Re: Infinite baffle idea
Soundstage implications are interesting. I have to say that my DIY OB speakers provide an extraordinarily big 3D soundstage that's high wide and deep - distinctly better than my semi-omnis. However, they need room to breathe with a meter or more behind them. Therefore, this would mean more rather than less speaker in the room.
- karatestu
- Posts: 5978
- Joined: Sun Jan 08, 2017 4:40 pm
- Location: North Yorkshire
- Has thanked: 1880 times
- Been thanked: 1415 times
Re: Infinite baffle idea
Hi Simon. I think true infinite baffle and open baffle have a lot in common like similar drivers are needed as regards Qts but there must be differences in speaker placement. OB's need to be out in the room to work well. A lot of IB's are built in to people's walls or floors or ceilings . If built into the back wall then there is no distance to the back wall as the wall is the baffle. Built into the floor then things may not be the same .Simon Hickie wrote: ↑Thu Oct 17, 2019 10:37 am Soundstage implications are interesting. I have to say that my DIY OB speakers provide an extraordinarily big 3D soundstage that's high wide and deep - distinctly better than my semi-omnis. However, they need room to breathe with a meter or more behind them. Therefore, this would mean more rather than less speaker in the room.
It is causing me a headache or two trying to work the details out. Trying to find drivers with Qts of 0.7 ish is very difficult. I have only found one so far and it was made for in car use really. As they don't have enclosures the Qts of the driver becomes the Qtc as there is no box to modify it. But then i have found other bits of information saying it can be done with Qts of 0.4 - 0.5 but results may be unpredictable.
I am quietly going Aaaarrrrghhhh.
Stu
DIY FREE ZONE
- karatestu
- Posts: 5978
- Joined: Sun Jan 08, 2017 4:40 pm
- Location: North Yorkshire
- Has thanked: 1880 times
- Been thanked: 1415 times
Re: Infinite baffle idea
Hi Howard. Can't do that i'm afraid as my cavity is full of insulation . Good idea though.howardc1951 wrote: ↑Thu Oct 17, 2019 12:08 am I remember someone mounting a 2 way system of a Decca ribbon tweeter and Kef eliptical bass unit on a front panel and then over a hole into the cavity space of his living room wall.
Good idea for a multi room application. Stick your drivers through an internal wall between two rooms you want music in. Double up on tweeter's (two in each room. Job done
DIY FREE ZONE