Integrated Amplifier Markings?
- savvypaul
- Posts: 8743
- Joined: Tue Oct 11, 2016 7:14 pm
- Location: Durham
- Has thanked: 1668 times
- Been thanked: 3034 times
- Contact:
Integrated Amplifier Markings?
We are designing cases for our new integrated amplifier. Earlier NVA integrated amps had 'Tape, Aux, Video, Tuner, Disc, CD. Would you keep the same? Would you change the names? Would you do away with the names and just have numbers? Would you have very minimal markings - just input and volume? What do you think?
-
- Posts: 1569
- Joined: Thu Aug 11, 2016 2:46 pm
- Location: Denham UK
- Has thanked: 135 times
- Been thanked: 483 times
Re: Integrated Amplifier Markings?
My Moth passive pre-amp has no markings, entirely reasonable as you can put any source into any input. It is, of course, necessary to remember what source you put into which input. The only input that needs identification is phono if there is a phono stage built in.savvypaul wrote: ↑Mon Oct 11, 2021 11:30 am We are designing cases for our new integrated amplifier. Earlier NVA integrated amps had 'Tape, Aux, Video, Tuner, Disc, CD. Would you keep the same? Would you change the names? Would you do away with the names and just have numbers? Would you have very minimal markings - just input and volume? What do you think?
Re: Integrated Amplifier Markings?
As (these days) inputs are either line or phono why not use Line 1, Line 2 etc for line inputs ?
Then the input selector can be 1, 2, 3 etc.
Does anyone really need a tape out these days ?
Then the input selector can be 1, 2, 3 etc.
Does anyone really need a tape out these days ?
- savvypaul
- Posts: 8743
- Joined: Tue Oct 11, 2016 7:14 pm
- Location: Durham
- Has thanked: 1668 times
- Been thanked: 3034 times
- Contact:
Re: Integrated Amplifier Markings?
They don't need it marked on the front but they might want the tape out facility to connect a headphone amplifier...
-
- Posts: 767
- Joined: Sat Jul 01, 2017 12:51 pm
- Location: South yorkshire
- Has thanked: 1 time
- Been thanked: 365 times
- Contact:
Re: Integrated Amplifier Markings?
Just numbers, 1,2,3 ect on the front.
I dont put any markings on at all unless im asked to. Anyone can feel the difference between a switch and an attenuator of some sort
On the rear, mark the tape loop as tape in tape out if it has one otherwise people run the risk of connecting the power amp to the fixed output part of the tape loop and getting a full blast signal with no attenuation.
I space the inputs well away from the outputs so you can visually tell whats what without any marking. Red socket top, black/white socket bottom. Say 3 inputs grouped together on the far left then one output on the far right, and maybe a tape loop on its own somewhere inbetween.
I dont put any markings on at all unless im asked to. Anyone can feel the difference between a switch and an attenuator of some sort
On the rear, mark the tape loop as tape in tape out if it has one otherwise people run the risk of connecting the power amp to the fixed output part of the tape loop and getting a full blast signal with no attenuation.
I space the inputs well away from the outputs so you can visually tell whats what without any marking. Red socket top, black/white socket bottom. Say 3 inputs grouped together on the far left then one output on the far right, and maybe a tape loop on its own somewhere inbetween.
Analogue: oracle delphi sme 309, jbe series 3 cx unipivot dv20x2l, roksan xerxes tabriz vm750, jvc ql-y5f rigb at440, jvc ql-y3f vm750, lenco 75, technics sl150
Phono stages: cole lcr, benedict audio hothead
Digital: cyrus cd7, wiim mini x2, topping e30, jds labs el dac 2+
Amplification: nelson pass b1, nelson pass f5
Speakers: 15" fane aperiodic wardrobes
Cans: myryad z40, hifiman sundara + deva, fostex t50rp, sennheiser momentum on ear +over ear, b&w p5 and p7
Phono stages: cole lcr, benedict audio hothead
Digital: cyrus cd7, wiim mini x2, topping e30, jds labs el dac 2+
Amplification: nelson pass b1, nelson pass f5
Speakers: 15" fane aperiodic wardrobes
Cans: myryad z40, hifiman sundara + deva, fostex t50rp, sennheiser momentum on ear +over ear, b&w p5 and p7
-
- Posts: 1569
- Joined: Thu Aug 11, 2016 2:46 pm
- Location: Denham UK
- Has thanked: 135 times
- Been thanked: 483 times
- Fretless
- Posts: 9348
- Joined: Wed Nov 12, 2014 12:15 pm
- Location: Somewhere in Holland
- Has thanked: 1521 times
- Been thanked: 2321 times
Re: Integrated Amplifier Markings?
'Line Out' perhaps?
Tape in & out is a bit archaic in the digital era.
Upstairs:
VinylPro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: Cube2 - SSP - LS6+ Sabaj A10a {x2)
Little Bear MC2 + AQ NightHawk
Downstairs:
VinylLogic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 & PSU - BMUAiyima A07 MAX + Arcam One
HP: Allo DigiOne + Sabaj A10d + AQ NightOwl
Office: Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith 887 + German Maestro GMP 450
-
- Posts: 1569
- Joined: Thu Aug 11, 2016 2:46 pm
- Location: Denham UK
- Has thanked: 135 times
- Been thanked: 483 times
Re: Integrated Amplifier Markings?
My only problem with calling it "Line Out" is that the main output is also a line out, "Direct Out" is what is used on mixers and is usually pre-fade allowing the output to be fed without any influence of the rest of the desk. A Tape Out is similar in that it comes before the volume control.
- Fretless
- Posts: 9348
- Joined: Wed Nov 12, 2014 12:15 pm
- Location: Somewhere in Holland
- Has thanked: 1521 times
- Been thanked: 2321 times
Re: Integrated Amplifier Markings?
There is also the possibility of 'Line Out Fixed' and 'Line Out Variable',
but 'Direct Out' is more, um, direct.
but 'Direct Out' is more, um, direct.
Upstairs:
VinylPro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: Cube2 - SSP - LS6+ Sabaj A10a {x2)
Little Bear MC2 + AQ NightHawk
Downstairs:
VinylLogic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 & PSU - BMUAiyima A07 MAX + Arcam One
HP: Allo DigiOne + Sabaj A10d + AQ NightOwl
Office: Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith 887 + German Maestro GMP 450