I have been having issues with distortion for a few weeks and I first noticed it on the right speaker . After much messing about I had decided that one of the Quads had a problem panel so made arrangements to get it back to AQuadthing Audio . Then today I noticed that the left speaker was starting to distort too which means it was not likely the Quads were at fault .
After a bit of plugging and unplugging of various components I found out that NVA Amps do not like DC Blockers . I have one pluged in and then run my extension from that . Taking the DC Blocker out of the chain restored the clean sound and allowed the volume to be pushed up without the sound breaking up with distortion .
Now there may be many on here that knew about this but I have found out the hard way . Things have returned to normal now and I am keeping my fingers crossed that I have not damaged the Amp .
Hope this helps some one else .
Many may already know this but I did not - NVA Amps
-
- Posts: 149
- Joined: Thu Nov 01, 2018 5:02 pm
- Location: Liverpool
- Has thanked: 60 times
- Been thanked: 116 times
Many may already know this but I did not - NVA Amps
- These users thanked the author Bencat57 for the post (total 2):
- savvypaul (Fri Jun 09, 2023 12:40 pm) • CycleCoach (Fri Jun 09, 2023 2:18 pm)
- Fretless
- Posts: 9329
- Joined: Wed Nov 12, 2014 12:15 pm
- Location: Somewhere in Holland
- Has thanked: 1514 times
- Been thanked: 2310 times
Re: Many may already know this but I did not - NVA Amps
Interesting. I have a DC Blocker sitting before the input to my NVA BMU and found that it improved the sound quality. It was needed to counter annoying buzzing from NVA amps caused by my solar panel array.
Different things work for different setups.
Different things work for different setups.
Upstairs:
VinylPro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: Cube2 - SSP - LS6+ Sabaj A10a {x2)
Little Bear MC2 + AQ NightHawk
Downstairs:
VinylLogic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 & PSU - BMUAiyima A07 MAX + Arcam One
HP: Allo DigiOne + Sabaj A10d + AQ NightOwl
Office: Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith 887 + German Maestro GMP 450
- savvypaul
- Posts: 8688
- Joined: Tue Oct 11, 2016 7:14 pm
- Location: Durham
- Has thanked: 1664 times
- Been thanked: 3006 times
- Contact:
Re: Many may already know this but I did not - NVA Amps
Different makes of DC blockers...?
I tried one ahead of my original BMU (which buzzed a lot) but adding the DC blocker flattened the sound.
Then I got a new BMU with Toroidy transformer and it doesn't buzz at all.
- Fretless
- Posts: 9329
- Joined: Wed Nov 12, 2014 12:15 pm
- Location: Somewhere in Holland
- Has thanked: 1514 times
- Been thanked: 2310 times
Re: Many may already know this but I did not - NVA Amps
Upstairs:
VinylPro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: Cube2 - SSP - LS6+ Sabaj A10a {x2)
Little Bear MC2 + AQ NightHawk
Downstairs:
VinylLogic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 & PSU - BMUAiyima A07 MAX + Arcam One
HP: Allo DigiOne + Sabaj A10d + AQ NightOwl
Office: Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith 887 + German Maestro GMP 450
-
- Posts: 149
- Joined: Thu Nov 01, 2018 5:02 pm
- Location: Liverpool
- Has thanked: 60 times
- Been thanked: 116 times
Re: Many may already know this but I did not - NVA Amps
That is the same as the one I was using . I do agree though it is different results for different systems as the ATL worked fine with no issues in my three way active system which by chance also has NVA Amplifiers in it . But now not sure if I will use it anywhere may just put it up for sale .
- CN211276
- Posts: 6552
- Joined: Tue Aug 09, 2016 9:29 am
- Location: Cardiff
- Has thanked: 1425 times
- Been thanked: 988 times
Re: Many may already know this but I did not - NVA Amps
I have the DC blocker from Bulgaria. It stopped the BMU buzzing but had a slight adverse effect on SQ. Stopped using it.
Main System
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Lindy cat 6 US ethernet cable
Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ
Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat
RIP Doc
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Lindy cat 6 US ethernet cable
Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ
Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat
RIP Doc
- TheMadMick
- Posts: 437
- Joined: Tue Jan 31, 2017 9:50 am
- Location: SOUTHPORT, UK
- Has thanked: 3 times
- Been thanked: 141 times
Re: Many may already know this but I did not - NVA Amps
My experience is similar to Fretless'. The SQ improved slightly with the same DC blocker and the buzzing went completely.
Horses for courses?
Horses for courses?
- These users thanked the author TheMadMick for the post:
- Bencat57 (Sat Jun 10, 2023 1:36 pm)
Blusound Vault 2, P50SA, A80's, BMU, TIS, LS7, MA PL200, Meridian 506 (18 bit).