Another DIY SS Amplifier with NVA Boards

A place for DIY project discussions.
User avatar
savvypaul
Posts: 8635
Joined: Tue Oct 11, 2016 7:14 pm
Location: Durham
Has thanked: 1657 times
Been thanked: 2978 times
Contact:
Great Britain

Re: Another DIY SS Amplifier with NVA Boards

Unread post by savvypaul »

SteveTheShadow wrote: Sun Jan 02, 2022 11:41 pm This integrated DIYNVA amp concept seems to be extremely successful. If Paul and Tomasz are resurrecting the idea of an integrated, then good on them. Offering the future NVA integrated with an upgrade of a built-in moving magnet only phono stage, at a price premium, whilst keeping MC capability and multiple regulators exclusively with the separate phonos, could be something to think about. Integrating the MM phono board into my own setup seems to have produced no problems, only benefits. In a commercial product however, it might be out of the question.
Under consideration, but not straightforward, and it has implications for the layout of the amp (phono stage fitted or not) as we would want it to be retrofittable.
I am in the hi-fi trade
Status: Manufacturer
Company Name: NVA Hi-Fi
https://nvahifi.co.uk/

User avatar
Latteman
Posts: 1220
Joined: Tue Aug 14, 2018 7:20 pm
Location: S. Yorkshire
Has thanked: 553 times
Been thanked: 297 times
Contact:
Great Britain

Re: Another DIY SS Amplifier with NVA Boards

Unread post by Latteman »

Is taking the power + & - from the amp board supply a ‘common’ method in integrated amps- I wonder if there is any effect on the power delivery, current or voltage to the input stage of the amp boards. Is there sufficient in reserve with the capacitors used?
Great looking amp and build 👍🏼
These users thanked the author Latteman for the post:
SteveTheShadow (Mon Jan 03, 2022 4:22 pm)
Analogue Source -
Denon DP47f- Ortofon mc20 supreme
Ifi Zen Phono
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- IfI stream, Ifi Neo idsd Dac; Tidal / Radio Paradise
Amplification Nva 30vdc mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources

User avatar
savvypaul
Posts: 8635
Joined: Tue Oct 11, 2016 7:14 pm
Location: Durham
Has thanked: 1657 times
Been thanked: 2978 times
Contact:
Great Britain

Re: Another DIY SS Amplifier with NVA Boards

Unread post by savvypaul »

Latteman wrote: Mon Jan 03, 2022 2:51 pm Is taking the power + & - from the amp board supply a ‘common’ method in integrated amps- I wonder if there is any effect on the power delivery, current or voltage to the input stage of the amp boards. Is there sufficient in reserve with the capacitors used?
Great looking amp and build 👍🏼
We would consider doing it in an amp fitted with separate input and output transformers, taking the power for the phono from the input transformer.
These users thanked the author savvypaul for the post:
Latteman (Mon Jan 03, 2022 3:40 pm)
I am in the hi-fi trade
Status: Manufacturer
Company Name: NVA Hi-Fi
https://nvahifi.co.uk/

User avatar
SteveTheShadow
Posts: 1646
Joined: Thu Sep 12, 2013 5:24 pm
Has thanked: 272 times
Been thanked: 339 times
Great Britain

Re: Another DIY SS Amplifier with NVA Boards

Unread post by SteveTheShadow »

Latteman wrote: Mon Jan 03, 2022 2:51 pm Is taking the power + & - from the amp board supply a ‘common’ method in integrated amps- I wonder if there is any effect on the power delivery, current or voltage to the input stage of the amp boards. Is there sufficient in reserve with the capacitors used?
Great looking amp and build 👍🏼
Just to add to Paul’s comment. In the days when integrated amps had phono stages, there was no problem with powering them from the single power transformer. My old Naim NAIT 2 would be a good example, or any A&R amp such as the A60 I once had: any standard amp for that matter. Phono boards don’t tend to draw much current, and they would have been decoupled from the other stages by the use of RC filters.
Mine is of course decoupled by a regulator, as would be any phono stage built into an NVA integrated amp.
These users thanked the author SteveTheShadow for the post:
Latteman (Mon Jan 03, 2022 5:29 pm)
Somebody’s telling me the latest scandals.
Somebody’s stepping on my plastic sandals. Joe Jackson (1979)

User avatar
r3xj0hn570n
Posts: 198
Joined: Fri Jun 25, 2021 4:54 am
Has thanked: 52 times
Been thanked: 129 times
Norfolk Island

Re: Another DIY SS Amplifier with NVA Boards

Unread post by r3xj0hn570n »

SteveTheShadow wrote: Fri Dec 31, 2021 8:24 pm
I also took the opportunity to attenuate the input with a potential divider ahead of the volume control. With this, the 2V output of the CD player and streamer drops to 800mV and with my high efficiency speakers, I can now get the volume above eight o’clock without blowing out the windows.
An alternative to simply attenuating the input is increasing the feedback ratio of the amp. This has other advantages too.
The NVA circuit normally has about 30dB of gain. You can drop 3dB out of this by dropping the series 18k resistor to 10k. It's this one.
steves_amp2.jpeg
steves_amp2.jpeg (149.68 KiB) Viewed 2731 times
These users thanked the author r3xj0hn570n for the post:
quickie2 (Tue Jan 11, 2022 8:02 pm)

User avatar
SteveTheShadow
Posts: 1646
Joined: Thu Sep 12, 2013 5:24 pm
Has thanked: 272 times
Been thanked: 339 times
Great Britain

Re: Another DIY SS Amplifier with NVA Boards

Unread post by SteveTheShadow »

r3xj0hn570n wrote: Fri Jan 07, 2022 11:02 pm
An alternative to simply attenuating the input is increasing the feedback ratio of the amp. This has other advantages too.
The NVA circuit normally has about 30dB of gain. You can drop 3dB out of this by dropping the series 18k resistor to 10k. It's this one.
Thanks. I’ll have a look at that option and thanks for pointing me to the location of said resistor. I’m a bit concerned that increasing the feedback levels might introduce instability, though I don’t know an awful lot about transistor circuitry. With that in mind, I could of course be worrying unnecessarily.
Somebody’s telling me the latest scandals.
Somebody’s stepping on my plastic sandals. Joe Jackson (1979)

User avatar
karatestu
Posts: 5945
Joined: Sun Jan 08, 2017 4:40 pm
Location: North Yorkshire
Has thanked: 1865 times
Been thanked: 1378 times
Great Britain

Re: Another DIY SS Amplifier with NVA Boards

Unread post by karatestu »

SteveTheShadow wrote: Sat Jan 08, 2022 9:35 am
r3xj0hn570n wrote: Fri Jan 07, 2022 11:02 pm
An alternative to simply attenuating the input is increasing the feedback ratio of the amp. This has other advantages too.
The NVA circuit normally has about 30dB of gain. You can drop 3dB out of this by dropping the series 18k resistor to 10k. It's this one.
Thanks. I’ll have a look at that option and thanks for pointing me to the location of said resistor. I’m a bit concerned that increasing the feedback levels might introduce instability, though I don’t know an awful lot about transistor circuitry. With that in mind, I could of course be worrying unnecessarily.
How about we let Rex try it out first and then he can report back on any fireworks :grin:
DIY FREE ZONE

User avatar
r3xj0hn570n
Posts: 198
Joined: Fri Jun 25, 2021 4:54 am
Has thanked: 52 times
Been thanked: 129 times
Norfolk Island

Re: Another DIY SS Amplifier with NVA Boards

Unread post by r3xj0hn570n »

karatestu wrote: Sat Jan 08, 2022 9:36 pm How about we let Rex try it out first and then he can report back on any fireworks :grin:
Fair enough. Next time i have my test amp apart i'll try it. Hmm , could just jumper a 22k on top...

There are other circuit mods i won't be reversing, but they don't affect the circuit stability.
These users thanked the author r3xj0hn570n for the post:
karatestu (Sun Jan 09, 2022 9:44 am)

User avatar
r3xj0hn570n
Posts: 198
Joined: Fri Jun 25, 2021 4:54 am
Has thanked: 52 times
Been thanked: 129 times
Norfolk Island

Re: Another DIY SS Amplifier with NVA Boards

Unread post by r3xj0hn570n »

OK, here is a rebuilt original curcuit AP20, -10dBFS 1kHz sine out the sound card.
AP20-original-at--10dBFS.jpg
AP20-original-at--10dBFS.jpg (155.19 KiB) Viewed 2525 times
Here it is with the 18k feedback resistor jumpered with a 22k.
AP20-10krfb-at--10dBFS.jpg
AP20-10krfb-at--10dBFS.jpg (148.79 KiB) Viewed 2525 times
Less output as predicted. Nothing untoward showing on my scope.

As an addendum, here is the output with the differential input emitter resistors (120R) jumpered (and FB back to 18k)
AP20-diff-bypass-at--10dBFS.jpg
AP20-diff-bypass-at--10dBFS.jpg (152.06 KiB) Viewed 2525 times
These users thanked the author r3xj0hn570n for the post (total 3):
karatestu (Thu Jan 13, 2022 7:33 am) • SteveTheShadow (Thu Jan 13, 2022 11:17 am) • NSNO2021 (Thu Jan 13, 2022 8:39 pm)

User avatar
karatestu
Posts: 5945
Joined: Sun Jan 08, 2017 4:40 pm
Location: North Yorkshire
Has thanked: 1865 times
Been thanked: 1378 times
Great Britain

Re: Another DIY SS Amplifier with NVA Boards

Unread post by karatestu »

r3xj0hn570n wrote: Thu Jan 13, 2022 4:53 am OK, here is a rebuilt original curcuit AP20, -10dBFS 1kHz sine out the sound card.
AP20-original-at--10dBFS.jpg

Here it is with the 18k feedback resistor jumpered with a 22k.
AP20-10krfb-at--10dBFS.jpg

Less output as predicted. Nothing untoward showing on my scope.

As an addendum, here is the output with the differential input emitter resistors (120R) jumpered (and FB back to 18k)

AP20-diff-bypass-at--10dBFS.jpg
Thanks for that Rex, that is very helpful.
DIY FREE ZONE

Post Reply