Lathe

A place for DIY project discussions.
User avatar
Dr Bunsen Honeydew
Posts: 30758
Joined: Wed Jul 11, 2012 7:26 pm
Location: Muppet Labs
Has thanked: 0
Been thanked: 48 times

Lathe

Unread post by Dr Bunsen Honeydew »

Any of you lot got a lathe.

I have a brass (I think) arm weight that has 28mm overall diameter and 25mm length with an internal hole of 17mm, I need the hole increased to 21mm.

Any offers of help appreciated.

valvesRus
Posts: 562
Joined: Sat Feb 24, 2018 2:34 pm
Has thanked: 25 times
Been thanked: 63 times
Great Britain

Re: Lathe

Unread post by valvesRus »

If you get no better offers I can do that for you.

Is it 21mm dead, or do you need some clearance ?

User avatar
Dr Bunsen Honeydew
Posts: 30758
Joined: Wed Jul 11, 2012 7:26 pm
Location: Muppet Labs
Has thanked: 0
Been thanked: 48 times

Re: Lathe

Unread post by Dr Bunsen Honeydew »

It is to go around 20mm so I put 21mm for some wiggle room. It has a screw to tighten on.

Why would another offer be better, ta for the belly rub :mrgreen:

PM me name and address to send to.

User avatar
Dr Bunsen Honeydew
Posts: 30758
Joined: Wed Jul 11, 2012 7:26 pm
Location: Muppet Labs
Has thanked: 0
Been thanked: 48 times

Re: Lathe

Unread post by Dr Bunsen Honeydew »

Ta mate brilliant work - pics on the G99 plus NEAT thread, looks a treat and sounds even better.

valvesRus
Posts: 562
Joined: Sat Feb 24, 2018 2:34 pm
Has thanked: 25 times
Been thanked: 63 times
Great Britain

Re: Lathe

Unread post by valvesRus »

Glad to be of service Richard. :)

Post Reply