A Fortunate Opportunity And Acquiring A Turntable I Don't Need

All general audio posts go here.
User avatar
Neonknight
Posts: 467
Joined: Sat Jun 18, 2016 1:49 am
Has thanked: 2 times
Been thanked: 54 times

A Fortunate Opportunity And Acquiring A Turntable I Don't Need

Unread post by Neonknight »

I was pretty well set with my two turntables, decided to keep my SP 10 with Riggle arm and my Serac, which happens to have a modded Rega on it for the moment. I would consider putting another arm on it, and just keep it as my casual table.

Then a friend sends me a Craigslist ad. There is a Denon DP 75, which is the US version of the DP 80 minus the pitch control. And it is mounted in a fairly rare VPI sprung plinth. Which happens to be an interpretation of the Cotter plinth for the big direct drive tables. The arm it comes with is a Acos GST 801, and a Fidelity Research MC 201 cartridge. I make a call, arrange a date, and go to pick it up.

I call the guy when getting close, and he tells me there is a problem with the arm. I go check the table out anyways, and agree on a reduced price that was very favorable. Some auxillary parts are missing on the arm, but it does play. i sent it out for evaluation and it looks like someone had issues with the magnetic VTF option. Now I was fortunate enough to find a NOS version of the arm in California, and am able to transfer some parts from the old arm to the new one to make it complete. Parts for the 801 are very difficult to find, so I feel fortunate to have a basically NOS arm for this table. The top plate of the VPI plinth is built of five layers of steel and damping material in between them. There is no arm board, and modifying it for a different length arm is problematic. The only arm I could find with the same mounting distance is a couple of Audio Technica ones.

I did trial the table with the old arm, and the initial results were very positive. I was able to statically balance the arm, and I used my Ortofon Cadenza Red as well as the Fidelity Research cartridge. The arm is a lovely bit of manufacturing, its as nice as I have seen from any high performance Japanese tone arm builder from this era. I am going to redo the spring assemblies on the VPI when I find the appropriate parts, but otherwise its ready to go. Here is a pic or two of it with the original GST 801 arm on it, it is missing the auxillary weight that is needed to play the heavy cartridges I prefer. But I got all the needed bits and pieces now to make the carm complete.

Anyways its a very nice table, and I think I will keep it for a good while.

Image

Image

Image

antonio66
Has thanked: 0
Been thanked: 0

Re: A Fortunate Opportunity And Acquiring A Turntable I Don't Need

Unread post by antonio66 »

There are no images available.

User avatar
Neonknight
Posts: 467
Joined: Sat Jun 18, 2016 1:49 am
Has thanked: 2 times
Been thanked: 54 times

Re: A Fortunate Opportunity And Acquiring A Turntable I Don't Need

Unread post by Neonknight »

Huh I got pics when I look at it.

User avatar
jayman67
Posts: 553
Joined: Fri Apr 01, 2016 6:28 pm
Location: brighton uk
Has thanked: 0
Been thanked: 0

Re: A Fortunate Opportunity And Acquiring A Turntable I Don't Need

Unread post by jayman67 »

i can see them too, very nice :)
Yamaha NS1000M speakers,Pioneer PLC-590 turntable,,Alphason HR-100S-MCS/Zeta tonearms,Denon 103sa cartridge ,Sony 700ES Amp,Sony X555ES CD Player, Nakamichi ca5 pre amp.

User avatar
guydarryl
Posts: 1153
Joined: Wed Jul 11, 2012 10:43 pm
Location: suffolk
Has thanked: 26 times
Been thanked: 18 times

Re: A Fortunate Opportunity And Acquiring A Turntable I Don't Need

Unread post by guydarryl »

strange - I can't
LP12, Ittok, DV10X5, Phono2(twin supply), P50SA , Art Audio Quintet, LS5, SSC, Rega Ela mk1
Sony cdp xb930, Alessandro ms1

User avatar
Dr Bunsen Honeydew
Posts: 30758
Joined: Wed Jul 11, 2012 7:26 pm
Location: Muppet Labs
Has thanked: 0
Been thanked: 48 times

Re: A Fortunate Opportunity And Acquiring A Turntable I Don't Need

Unread post by Dr Bunsen Honeydew »

Me neither

User avatar
zebbo
Posts: 1738
Joined: Thu Jul 12, 2012 8:22 am
Location: As close to France as you can get.
Has thanked: 7 times
Been thanked: 28 times
Great Britain

Re: A Fortunate Opportunity And Acquiring A Turntable I Don't Need

Unread post by zebbo »

No images for me.
Audio Grail "Sable" Garrard 401 with Cumbrian Green Slate plinth / Audiomods 6 / Benz Micro Gullwing SLR, Phono 2, NVA INT400sa. (Oh and a Copland CDA823 CD Player, for when I fancy a bit of the devil's spawn!) :lol:

User avatar
Neonknight
Posts: 467
Joined: Sat Jun 18, 2016 1:49 am
Has thanked: 2 times
Been thanked: 54 times

Re: A Fortunate Opportunity And Acquiring A Turntable I Don't Need

Unread post by Neonknight »

Try this again
a2.JPG
a2.JPG (63.76 KiB) Viewed 3660 times
a3.JPG
a3.JPG (87.2 KiB) Viewed 3660 times
A1.JPG
A1.JPG (80.12 KiB) Viewed 3660 times

User avatar
Neonknight
Posts: 467
Joined: Sat Jun 18, 2016 1:49 am
Has thanked: 2 times
Been thanked: 54 times

Re: A Fortunate Opportunity And Acquiring A Turntable I Don't Need

Unread post by Neonknight »

Try this again, lets see if these images will come through this time.
a2.JPG
a3.JPG
A1.JPG

User avatar
Firebug1
Posts: 683
Joined: Thu Nov 20, 2014 5:07 am
Has thanked: 322 times
Been thanked: 122 times
Finland

Re: A Fortunate Opportunity And Acquiring A Turntable I Don't Need

Unread post by Firebug1 »

Now they can be seen. Nice collection of tt's!
Rega by Michael Lim\Teac\ASR\NVA\
SA Mantra30\Audeze LCD-2 closed.
...the Gods you worship are steel, at the altar of rock 'n' roll you kneel...

Post Reply