Valves. Hot air or something init.
-
- Posts: 1569
- Joined: Thu Aug 11, 2016 2:46 pm
- Location: Denham UK
- Has thanked: 135 times
- Been thanked: 483 times
Re: Valves. Hot air or something init.
It might be worth remembering that valves are still very much in current usage.
Valve amplifiers never really went away it is simply that speakers became less efficient and couldn’t be driven adequately by relatively inexpensive valve amps. Transistors could deliver more power at a much lower cost. Best way to find out whether there is anything in it is to try one.
Valve amplifiers never really went away it is simply that speakers became less efficient and couldn’t be driven adequately by relatively inexpensive valve amps. Transistors could deliver more power at a much lower cost. Best way to find out whether there is anything in it is to try one.
-
- Posts: 8587
- Joined: Thu Jul 12, 2012 7:16 am
- Has thanked: 24 times
- Been thanked: 399 times
Re: Valves. Hot air or something init.
It appears most of the things written about valves is bullshit.
A good valve amp is not just about the valves used .
A good valve amp is not just about the valves used .
- These users thanked the author Daniel Quinn for the post:
- SteveTheShadow (Mon Apr 19, 2021 8:46 am)
- SteveTheShadow
- Posts: 1653
- Joined: Thu Sep 12, 2013 5:24 pm
- Has thanked: 272 times
- Been thanked: 351 times
Re: Valves. Hot air or something init.
Most of the stuff written about 300Bs is complete crap. They are an absolute bastard to drive, which means that getting a good power bandwidth out of them requires large voltage swings and plenty of quiescent current in said driver.Daniel Quinn wrote: ↑Mon Apr 19, 2021 8:41 am It appears most of the things written about valves is bullshit.
The 6SN7 cascaded setup that a lot of manufacturers use to drive 300Bs only does half the job. Yes, it provides plenty voltage swing but current drive is inadequate. The resulting amp works, but sounds warm, and cuddly with crap bass. Some people want that and think it is the sound of valves because that is what they’ve been led to believe a valve amp sounds like. It’s not what a good valve amp sounds like, it’s what a mediocre valve amp sounds like.
To be quite honest, I’ve never liked 300B amps, even when they are done right with adequate drivers, but that’s only my opinion. Others love them. The valves themselves are very expensive and the amps are not worth the prices being charged. A cheap one is worse than useless (crappy output transformer) and will not give the listener a proper tase of what a decent valve amp is capable of. TBH direct heated, single ended triode 300Bs are a bloody minefield.
If you are used to solid state amplifiers, I would start with manufacturers such as Primaluna or Icon Audio and have a look at their ranges. EL34s and KT88 in push-pull ultra-linear operation sound great and give decent power outputs into real world speakers.
Single ended valve amps require high efficiency speakers such as the Klipsch speakers Paul uses otherwise you are on a hiding to nothing.
- These users thanked the author SteveTheShadow for the post:
- antonio66 (Tue Apr 20, 2021 2:45 am)
Somebody’s telling me the latest scandals.
Somebody’s stepping on my plastic sandals. Joe Jackson (1979)
Somebody’s stepping on my plastic sandals. Joe Jackson (1979)
-
- Posts: 1569
- Joined: Thu Aug 11, 2016 2:46 pm
- Location: Denham UK
- Has thanked: 135 times
- Been thanked: 483 times
Re: Valves. Hot air or something init.
To your first point, that may be because those who really know about valves don't/didn't write much, discussion forums weren't around in the 1960s. Many people who had done well with valves, Harold Leak, Peter Walker and the like were happily embracing transistors.Daniel Quinn wrote: ↑Mon Apr 19, 2021 8:41 am It appears most of the things written about valves is bullshit.
A good valve amp is not just about the valves used .
To your second point, spot on!
To say that an amp is defined by the valves used is rather like saying that good music is defined by the instruments. By that measure, give me a Stradivarius and I should be able to play beautifully, which is patently rubbish because I can't play the violin, irrespective of the maker. A good valve amp is about how the valves are used rather than which ones.
Re: Valves. Hot air or something init.
Yes, but.
There are certain valves that are more likely to give you an excellent amplifier, but they still need proper implementation and good quality hardware.
The Audio Talk Owston event is a good place to go to hear a varied selection of amplification and complete systems. I'm certainly looking forward to when the next one might be.
There are certain valves that are more likely to give you an excellent amplifier, but they still need proper implementation and good quality hardware.
The Audio Talk Owston event is a good place to go to hear a varied selection of amplification and complete systems. I'm certainly looking forward to when the next one might be.
Re: Valves. Hot air or something init.
Another thing, It's not uncommon for valve amps to use solid state components to heat directly heated valves and to drive the power valve.
My own 833a (GU-48) monster will have a solid state "power drive" stage to drive the 833a into A2.
So, does that make them "hybrid" amps ?
My own 833a (GU-48) monster will have a solid state "power drive" stage to drive the 833a into A2.
So, does that make them "hybrid" amps ?
- savvypaul
- Posts: 8743
- Joined: Tue Oct 11, 2016 7:14 pm
- Location: Durham
- Has thanked: 1668 times
- Been thanked: 3034 times
- Contact:
Re: Valves. Hot air or something init.
'Lots of iron' is one thing I'm told a lot about valve amps.
The SET I have here weighs around 45kg!
The SET I have here weighs around 45kg!
- CN211276
- Posts: 6566
- Joined: Tue Aug 09, 2016 9:29 am
- Location: Cardiff
- Has thanked: 1438 times
- Been thanked: 992 times
Re: Valves. Hot air or something init.
What the Doc said is in his opening post in the hifi industry hobby thread. I got it slightly wrong. He basicaly said because Naim amps are so bad enthusiasts went retro and turned to valves because the flat earth said valves could not compete with transistors.nilsatisnisioptimum wrote: ↑Mon Apr 19, 2021 7:01 amThat's a deliberately provocative view and not one I believe RD was truly signed up too, I guess he was just having a bit of fun at Naim's expense
I will one day give them a go simply to satisfy my curiosity
Main System
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Lindy cat 6 US ethernet cable
Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ
Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat
RIP Doc
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Lindy cat 6 US ethernet cable
Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ
Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat
RIP Doc
- Neonknight
- Posts: 467
- Joined: Sat Jun 18, 2016 1:49 am
- Has thanked: 2 times
- Been thanked: 54 times
Re: Valves. Hot air or something init.
I owned tube amplification from my early 20s to just a few years ago. If you have the right speakers a SET amplifier can be heavenly. I have heard many a push pull sound nice also, but in the end there is some coloration to tube amps. It also drives me crazy that you can change tubes and alter the sound significantly, so how do you know what sound is "right" or if the amp is operating optimally?
One type of amp I have never heard but am intrigued by is OTL. Transformers seem to have a significant impact on sound and really are a bottleneck in some ways. So if you remove them and directly couple to the tube, what will the end result be?
Maybe one day I can find some Atmasphere and will give it a shot.
One type of amp I have never heard but am intrigued by is OTL. Transformers seem to have a significant impact on sound and really are a bottleneck in some ways. So if you remove them and directly couple to the tube, what will the end result be?
Maybe one day I can find some Atmasphere and will give it a shot.
-
- Posts: 1022
- Joined: Mon Jul 29, 2019 8:16 am
- Location: Grimsby/Phnom Penh
- Has thanked: 1506 times
- Been thanked: 422 times
Re: Valves. Hot air or something init.
Does it really matter if you are listening to the 'right' sound NK, as long as you enjoy it. When listening to different brands of SS amps, they sound different, which of them are 'right'.