Modding a Logitech Transporter

A place for DIY project discussions.
Tony Moore
Posts: 43
Joined: Wed Sep 12, 2012 9:07 pm
Location: New Brighton
Has thanked: 10 times
Been thanked: 28 times
Great Britain

Modding a Logitech Transporter

Unread post by Tony Moore »

I'm not sure if anyone will be interested in this but here goes...

I've been into the Logitech Squeezeboxes for a long time, having three SB3s, a Duet and 2 SB radios. (I never did get the boombox or the touch) The "Transporter" was always the one lusted after and way out of my price range.

Years go by...

Things have moved on and Logitech dropped the ball and I found a guy on Ebay selling the Transporter "special edition" that doesn't have the twirly-wheel for a fraction of the original cost. I just couldn't resist. I know, it's old tech by today's standards but somehow the original urge to own one way back when won out.

Image

Of course the lid had to come off just as soon as you can say "stripped screw remover".

Image

They must've put the screws in with one of those air-driven things they use for car wheelnuts!

Anyway, initial sound-wise this thing had potential and it has all sorts of interfaces including balanced and unbalanced analogue, SP/Dif optical and co-axial and AES/UBU in and out. Plus word clock input! I guess the clue is in the name "Transport-er".

So I listened to it for a while and thought, hmmmm, a bit jumbled and lacking in coherence. So that's when the idea to try experiments to see if I could improve it came along. The Transporter uses an AKM4396 DAC and looking up the datasheet I could see that they had simply used the reference line output circuit as-is with no changes. In fact the datasheets has two circuits, one for unbalanced and another for balanced + unbalanced. It was this latter one they have used. The downside is that the circuit is more complicated than it needs to be if you only want unbalanced and there are electrolytic caps in the path.

So my idea was to try some alternative output stages. The first one I tried was based upon the "FETishator" which I just tried to find links for again but all that comes up is porn sites. lol. Believe me is a real thing and by the Lampizator guy.

Anyway, I built a couple and tried them out:

Image

It was an interesting change to the sound and although was smooth and very laid back it wasn't my scene so back to the drawing board. Next up I decided to reproduce the simpler of the circuits in the datasheet, dedicated to unbalanced.

Image

Of course I made a mistake with the pcb desgn and had to bodge it but oh well..

The sound was now the best I've had from the unit. Very dynamic and exciting but not harsh or jumbled.

Then more reading the web and deciding to see if transformers could be the way forward? My friend had some spare cheap line transformers which he gave me to try out:

Image

The poor transporter was starting to look very abused by this stage! Anyway, the transformers brought a whole new level of realism in the midranges, voices really sounded fabulous, as did piano. Bass was a little light but expected from such small transformers. So at this point I took the plunge and bought some Lundahl high level line transformers from Sweden. These took a long time to arrive but they came last week and this is the final result:

Image

I now have two of the modes connected, the op-amp circuits go to the existing phono sockets (disconnected from the original cct) and the transformers go to a separate set of phonos.

The sound from the transformers is sweeter and more natural than that from the op-amp drivers but there is a "family" likeness that shows I have found the sound of the DAC itself (rather than the associated circuitry) and I will let it run in and test it out with all sorts of music.

It was an enjoyable journey and has got me back into DIY and electronics after a long drought period.
These users thanked the author Tony Moore for the post (total 5):
Grumpytim (Sun May 16, 2021 3:31 pm) • CycleCoach (Sun May 16, 2021 3:55 pm) • slinger (Sun May 16, 2021 3:58 pm) • karatestu (Sun May 16, 2021 4:13 pm) • Latteman (Sun May 16, 2021 5:05 pm)

User avatar
Fretless
Posts: 9290
Joined: Wed Nov 12, 2014 12:15 pm
Location: Somewhere in Holland
Has thanked: 1487 times
Been thanked: 2280 times
Netherlands

Re: Modding a Logitech Transporter

Unread post by Fretless »

Nice work and good pics too! :clap:

Upstairs:
Vinyl
Pro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: P50sa - Cube2 - SSP - LS6+ Sabaj A10a (x2)
Downstairs:
Vinyl
Logic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 - BMU+ Aiyima A07 MAX (x2) + Arcam One
HP: HifiBerry Digi+ PRO + Sabaj A10d
Office:
Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith THX AAA 887
Headphones: German Maestro, Monolith & AQ

antonio66
Posts: 1006
Joined: Mon Jul 29, 2019 8:16 am
Location: Grimsby/Phnom Penh
Has thanked: 1449 times
Been thanked: 408 times
Great Britain

Re: Modding a Logitech Transporter

Unread post by antonio66 »

I will second the nice work, but I could not help wondering why not the dac chip as well.

Tony Moore
Posts: 43
Joined: Wed Sep 12, 2012 9:07 pm
Location: New Brighton
Has thanked: 10 times
Been thanked: 28 times
Great Britain

Re: Modding a Logitech Transporter

Unread post by Tony Moore »

antonio66 wrote: Mon May 17, 2021 6:30 am I will second the nice work, but I could not help wondering why not the dac chip as well.
It's a nice sounding DAC chip actually but now you mention it...hmmmm. :epopc:

I do have another double crown 1541 chip spare... :think:
These users thanked the author Tony Moore for the post:
antonio66 (Mon May 17, 2021 1:30 pm)

Tony Moore
Posts: 43
Joined: Wed Sep 12, 2012 9:07 pm
Location: New Brighton
Has thanked: 10 times
Been thanked: 28 times
Great Britain

Re: Modding a Logitech Transporter

Unread post by Tony Moore »

On a practical note though, the main issue with using the TDA1541A chip in there is the limited space. There's room for a pcb to house it and the power supplies and the I/V but it's the transformer that is the issue. I'd need 5 secondaries, 4 x 8v and a 15v. To do this in the space would need a custom toroidal essentially. If anyone knows where I might get a transformer wound for not too much money I might give this project a go! (Now look what you've started!) :lol:

User avatar
karatestu
Posts: 5945
Joined: Sun Jan 08, 2017 4:40 pm
Location: North Yorkshire
Has thanked: 1865 times
Been thanked: 1378 times
Great Britain

Re: Modding a Logitech Transporter

Unread post by karatestu »

Tony Moore wrote: Mon May 17, 2021 10:53 am On a practical note though, the main issue with using the TDA1541A chip in there is the limited space. There's room for a pcb to house it and the power supplies and the I/V but it's the transformer that is the issue. I'd need 5 secondaries, 4 x 8v and a 15v. To do this in the space would need a custom toroidal essentially. If anyone knows where I might get a transformer wound for not too much money I might give this project a go! (Now look what you've started!) :lol:
You could try Tiger toroids

https://www.tigertoroids.co.uk/
These users thanked the author karatestu for the post (total 2):
antonio66 (Mon May 17, 2021 1:31 pm) • Tony Moore (Mon May 17, 2021 1:32 pm)
DIY FREE ZONE

Vinyl-ant
Posts: 765
Joined: Sat Jul 01, 2017 12:51 pm
Location: South yorkshire
Has thanked: 1 time
Been thanked: 363 times
Contact:
Great Britain

Re: Modding a Logitech Transporter

Unread post by Vinyl-ant »

Toroidy are rather good, i had a new mains transformer for my phono stage made, and it was good value for money too
These users thanked the author Vinyl-ant for the post:
Tony Moore (Mon May 17, 2021 5:08 pm)
Analogue: oracle delphi sme 309, jbe series 3 cx unipivot dv20x2l, roksan xerxes tabriz vm750, jvc ql-y5f rigb at440, jvc ql-y3f vm750, lenco 75, technics sl150

Phono stages: cole lcr, benedict audio hothead

Digital: cyrus cd7, wiim mini x2, topping e30, jds labs el dac 2+

Amplification: nelson pass b1, nelson pass f5

Speakers: 15" fane aperiodic wardrobes

Cans: myryad z40, hifiman sundara + deva, fostex t50rp, sennheiser momentum on ear +over ear, b&w p5 and p7

Tony Moore
Posts: 43
Joined: Wed Sep 12, 2012 9:07 pm
Location: New Brighton
Has thanked: 10 times
Been thanked: 28 times
Great Britain

Re: Modding a Logitech Transporter

Unread post by Tony Moore »

Tony Moore wrote: Mon May 17, 2021 8:57 am
antonio66 wrote: Mon May 17, 2021 6:30 am I will second the nice work, but I could not help wondering why not the dac chip as well.
It's a nice sounding DAC chip actually but now you mention it...hmmmm. :epopc:

I do have another double crown 1541 chip spare... :think:
OK, you really started something... :doh:

Never one to shirk a challenge...

I looked up some implementations of the TDA1541A DAC and of course Pedja Rogic is something of a master with this DAC, having done a lot of work over many years. I've also been using his first generation PCB for many years and love it so it was a low risk option to build on his designs that he generously publishes on the web for his earlier work.

Image

This is not finished yet but it is now up and running. I've used Pedja's design of power supplies from his AYA 2 DAC and for the I/V I've implemented his OPA861 circuit. Perhaps overkill but I can't skimp on a challenge. lol

I now have all three outputs taken out to phonos: Basic op-amp from original AKM DAC, Lundahl transformers from AKM and the 1541A outputs. Hopefully this might provide some amusement at a future meetup.
These users thanked the author Tony Moore for the post (total 2):
karatestu (Tue Jul 06, 2021 8:46 pm) • SteveTheShadow (Tue Jul 06, 2021 8:59 pm)

antonio66
Posts: 1006
Joined: Mon Jul 29, 2019 8:16 am
Location: Grimsby/Phnom Penh
Has thanked: 1449 times
Been thanked: 408 times
Great Britain

Re: Modding a Logitech Transporter

Unread post by antonio66 »

Nice work, three dac's in one.

Tony Moore
Posts: 43
Joined: Wed Sep 12, 2012 9:07 pm
Location: New Brighton
Has thanked: 10 times
Been thanked: 28 times
Great Britain

Re: Modding a Logitech Transporter

Unread post by Tony Moore »

A quick update. I have now tried another permutation for the DAC board itself. After more research I found some advice on I2S attenuation and DEM reclocking so I decided to implement these as a comparison with the simpler arrangement. Also the "orange drop" capacitors for decoupling since the opinion is that they are good in this use.

Image

The chip in there currently is the "standard" A version but it sounds really amazing now. I'm not sure whether the improvement is based on the I2S attenuation or the change in decoupling caps though so I have another version of the board that I will build to try the Wima caps in comparison.

I am starting to sound really obsessive now. lol. :oops:

But how else to know which is best? It is relatively easy to swap out these modules and isolate parts of the circuit and components to find out if and what might affect the sound.

I am very pleased with it so far though.
These users thanked the author Tony Moore for the post:
antonio66 (Mon Jul 19, 2021 11:21 pm)

Post Reply