Moving to 4.0 or 5.0 or 7.0 from 2.0
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: Moving to 4.0 or 5.0 or 7.0 from 2.0
I would go for these https://www.fane-international.com/view ... OSSUS-18XB
- Lindsayt
- Posts: 4235
- Joined: Fri Jul 13, 2012 9:06 pm
- Has thanked: 1115 times
- Been thanked: 702 times
Re: Moving to 4.0 or 5.0 or 7.0 from 2.0
That Fane looks like a nice driver and you can pick them up 2nd hand.
However they are more suited to ported enclosures than infinite baffles, according to the info supplied by Fane.
Could I find something better for my sealed box tastes for similar money?
However they are more suited to ported enclosures than infinite baffles, according to the info supplied by Fane.
Could I find something better for my sealed box tastes for similar money?
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: Moving to 4.0 or 5.0 or 7.0 from 2.0
Yes they have other ones for sealed boxes, read the website. To be honest it will make no difference, all the drivers have stiff surrounds, you can't have soft surrounds with 15 or 18 inch drivers so just treat it as marketing bollocks.
- These users thanked the author Dr Bunsen Honeydew for the post:
- Lindsayt (Wed Apr 22, 2020 9:44 pm)
- Lindsayt
- Posts: 4235
- Joined: Fri Jul 13, 2012 9:06 pm
- Has thanked: 1115 times
- Been thanked: 702 times
Re: Moving to 4.0 or 5.0 or 7.0 from 2.0
Our Denon 1800BD blu ray player went BER (beyond Economical Repair) this week.
When trying to play a blu ray, there was a burnt electrical smell and the solenoid is just clicking without it powering on properly.
Shoddy junk. It only lasted 11 years and I paid about £100 for it.
We're now using my son's Xbox One as the blu ray player. For which it seems to be doing an OK job.
We set the sound settings on the Xbox to bitstream to allow the Atmos receiver to do the sound processing.
When trying to play a blu ray, there was a burnt electrical smell and the solenoid is just clicking without it powering on properly.
Shoddy junk. It only lasted 11 years and I paid about £100 for it.
We're now using my son's Xbox One as the blu ray player. For which it seems to be doing an OK job.
We set the sound settings on the Xbox to bitstream to allow the Atmos receiver to do the sound processing.
- Latteman
- Posts: 1225
- Joined: Tue Aug 14, 2018 7:20 pm
- Location: S. Yorkshire
- Has thanked: 561 times
- Been thanked: 301 times
- Contact:
Re: Moving to 4.0 or 5.0 or 7.0 from 2.0
Been using a ps3 for a while now for cd & Blue ray- not too shabby imho
Apparently they can be ‘jail broke’ and streaming app or software installed
Apparently they can be ‘jail broke’ and streaming app or software installed
Analogue Source -
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
- Lindsayt
- Posts: 4235
- Joined: Fri Jul 13, 2012 9:06 pm
- Has thanked: 1115 times
- Been thanked: 702 times
Re: Moving to 4.0 or 5.0 or 7.0 from 2.0
Got fed up with using the x-box for blu rays and DVD's so I bought a used 4k blu ray player off avforums classified section for £100.
The settings on the x-box seemed to spontaneously change too often for me to carry on using it.
The player works fine, but has mildly annoying non-tactile power and and eject buttons. Annoying to find and operate in the dark.
The 4k is a bit of a waste with my 1920 FHD resolution projector. A 4k projector would be nice, but I sit about 15 feet from the screen and I'm in no hurry to splash out £1000+ for a used 4k projector...
One of my Linn Saras has stopped working properly. Voicecoil rub on one, or possibly both woofers. I've bought replacement used woofers and discovered that my Weller 50 watt TCP iron with a fine tip isn't man enough to desolder the terminals on the woofer. So I've invested £24 in a 100 watt iron from Antex.
The settings on the x-box seemed to spontaneously change too often for me to carry on using it.
The player works fine, but has mildly annoying non-tactile power and and eject buttons. Annoying to find and operate in the dark.
The 4k is a bit of a waste with my 1920 FHD resolution projector. A 4k projector would be nice, but I sit about 15 feet from the screen and I'm in no hurry to splash out £1000+ for a used 4k projector...
One of my Linn Saras has stopped working properly. Voicecoil rub on one, or possibly both woofers. I've bought replacement used woofers and discovered that my Weller 50 watt TCP iron with a fine tip isn't man enough to desolder the terminals on the woofer. So I've invested £24 in a 100 watt iron from Antex.
- Lindsayt
- Posts: 4235
- Joined: Fri Jul 13, 2012 9:06 pm
- Has thanked: 1115 times
- Been thanked: 702 times
Re: Moving to 4.0 or 5.0 or 7.0 from 2.0
My Marantz SR6010 has started switching itself off at semi random times when it's in use. When it does this the power LED flashes red. Pressing the power button will stop the flashing. Pressing it again will turn the receiver back on.Lindsayt wrote: ↑Sat Oct 29, 2016 1:40 am I bought a Marantz SR6010 for £480.
I've initially set it up as a 7.0 system. Using EV Sentrys as fronts, a Linn Isobarik as the centre speaker, Saras as rears and Heybrook HB1's as sides.
After watching an Our Brand is Crisis DVD on it my children declared that it was a waste of money.
We'll be trying it out with some different films and speaker configurations over the next few weeks...
When the system has not been used for a day or two it will stay on for about 40 minutes. Then after that it will power itself off with a shorter and shorter interval, as I try to watch through to the end of Match of the Day or a film.
My guess is the power supply is kaput.
Seems to be the nature of modern electronics. Won't last as long as 10 years. Throw-away society and all that.
So I'm on the look-out for a replacement AV receiver.
Thinking of getting something like a used Denon 3500H or 3600H...
- slinger
- Posts: 9313
- Joined: Wed Aug 22, 2012 4:30 pm
- Location: The Garden of England
- Has thanked: 4690 times
- Been thanked: 3166 times
Re: Moving to 4.0 or 5.0 or 7.0 from 2.0
Funnily enough, I was looking at Denon units today, specifically the AVR-X3400H and the AVR-X2700H, but I've just forked out for a new telly (and a new phone) so I don't think I'll be buying one just yet.
Amps - NVA P50, AP30, A40, Stanislav Palo Tube Headphone Amp BB 85
Speakers - Monitor Audio Silver RX2
Cables - NVA LS1+LS3, SSC, Gotham S/PDIF, IBRA Optical
Digital - NAD C516BEE, SONY ST-SDB900 DAB TUNER, TEAC UD-H01 DAC
Analogue - Pro-Ject Debut Carbon Esprit SB, Graham Slee Gram Amp 2 Phono
Cans - Grado SR80, ATH-M50X
Speakers - Monitor Audio Silver RX2
Cables - NVA LS1+LS3, SSC, Gotham S/PDIF, IBRA Optical
Digital - NAD C516BEE, SONY ST-SDB900 DAB TUNER, TEAC UD-H01 DAC
Analogue - Pro-Ject Debut Carbon Esprit SB, Graham Slee Gram Amp 2 Phono
Cans - Grado SR80, ATH-M50X
- Lindsayt
- Posts: 4235
- Joined: Fri Jul 13, 2012 9:06 pm
- Has thanked: 1115 times
- Been thanked: 702 times
Re: Moving to 4.0 or 5.0 or 7.0 from 2.0
Bought a used Denon 3500H off Facebook Marketplace for £320.
Initial thoughts are that it sounds tonally leaner than the Marantz - and OK overall. Maybe I need to fiddle with the default, post auto-setup EQ settings?
I'll see how I get on when I get my next couple of rental blu rays later this week...
It'd be nice if this receiver keeps working for another 10 years...
Initial thoughts are that it sounds tonally leaner than the Marantz - and OK overall. Maybe I need to fiddle with the default, post auto-setup EQ settings?
I'll see how I get on when I get my next couple of rental blu rays later this week...
It'd be nice if this receiver keeps working for another 10 years...
- slinger
- Posts: 9313
- Joined: Wed Aug 22, 2012 4:30 pm
- Location: The Garden of England
- Has thanked: 4690 times
- Been thanked: 3166 times
Re: Moving to 4.0 or 5.0 or 7.0 from 2.0
That was a decent price. I'll be interested in your comments once you've beaten it into submission.Lindsayt wrote: ↑Sun Feb 25, 2024 3:47 pm Bought a used Denon 3500H off Facebook Marketplace for £320.
Initial thoughts are that it sounds tonally leaner than the Marantz - and OK overall. Maybe I need to fiddle with the default, post auto-setup EQ settings?
I'll see how I get on when I get my next couple of rental blu rays later this week...
It'd be nice if this receiver keeps working for another 10 years...
Amps - NVA P50, AP30, A40, Stanislav Palo Tube Headphone Amp BB 85
Speakers - Monitor Audio Silver RX2
Cables - NVA LS1+LS3, SSC, Gotham S/PDIF, IBRA Optical
Digital - NAD C516BEE, SONY ST-SDB900 DAB TUNER, TEAC UD-H01 DAC
Analogue - Pro-Ject Debut Carbon Esprit SB, Graham Slee Gram Amp 2 Phono
Cans - Grado SR80, ATH-M50X
Speakers - Monitor Audio Silver RX2
Cables - NVA LS1+LS3, SSC, Gotham S/PDIF, IBRA Optical
Digital - NAD C516BEE, SONY ST-SDB900 DAB TUNER, TEAC UD-H01 DAC
Analogue - Pro-Ject Debut Carbon Esprit SB, Graham Slee Gram Amp 2 Phono
Cans - Grado SR80, ATH-M50X