Big old bass cubes back up and running cos I have completed two of my regulated front end power amps.
![Dance :dance:](./images/smilies/eusa/dance.gif)
Put it on the mid range for now.
Output stage has 350VA to schottky rectifiers to 6 x 10,000uf caps to amp board (54V)
Input stage has 50VA (for now) to soft recovery rectifier diodes to 6 X 4,700uf caps to Avondale regulator board to amp board (47V)
It took me a while to do as this was my first time splitting the stages in a poweramp
![Pray :pray:](./images/smilies/eusa/pray.gif)
Triple checked everything and turned on with a broom handle (only joking). I was a bit nervous though. Apparently there is more chance of DC getting to the drivers if the front end is split off and it fails ..gulp.
I am very impressed by what has happened with this
![Dance :dance:](./images/smilies/eusa/dance.gif)
I put the first two completed on the mid range as I thought I would get most benefit from starting there. Next will be the tweeter monoblocs. I don't know if the bass will get done as I don't have enough regulator boards to do it but I could split them off and give separate psu's without regulators. Maybe I could swap the tweeter amps on to the bass and see if it is worthwhile there too before hassling les at Avondale for two more regulator boards.
Onward to the next two monoblocs........................